NANO_IN_POE - Ethernet Digital input Unit with pulse counting, Web, SNMP, Modbus TCP, LED Display, POE

£115.00

(£138.00 Inc. VAT)

5 in stock, immediate despatch

–

The NANO_IN_POE is a Ethernet Web controlled digital input unit with a single opto-isolated input that can also count pulses. Input status The input status is also visible on the 7-segment LED display. The device can be powered by PoE compliant with IEEE 802.3af or 12-24 VDC power supply. Users can monitor the input from any web enabled device. The unit also supports SNMP for IT users and Modbus/TCP for industrial users.

1 x opto-isolated digital input
Volt-free contact closure or voltage input;
- logic level 1: 10~24V
Input also operates as 100Hz pulse counter
Isolation Voltage: 2000Vdc
Web Interface
Communications Protocols;
- HTTP (GET)
- SNMP (Trap)
- Modbus TCP
- TCP (shared protocol)
- MQTT Inveo
Dimensions: 66mm x 50mm x 20mm
Power supply: 10-24VDC or PoE IEEE 802.3af
Operating Temperature: -10°C to 60°C
CE compliant

Web Interface

The built-in web-server can be used to configure parameters such as IP address etc, and to control the relays, monitor the inputs, and read pulse count values.

Direct connection between modules (bridge connection)

The NANO_IN can be configured in a bridge connection where the digital signal is reproduced on a NANO_OUT output Relay.