A-1219 Wifi Modbus TCP - 8-Ch Analogue Input Unit, 4-20mA, Thermocouples, Thermistor
A-1219 Wifi Modbus TCP - 8-Ch Analogue Input Unit, 4-20mA, Thermocouples, Thermistor

A-1219 Wifi Modbus TCP - 8-Ch Analogue Input Unit, 4-20mA, Thermocouples, Thermistor

£122.40
(£146.88 Inc. VAT)
Add USB Programming Lead
7 in stock, immediate despatch
+

The  A-1219 is a Wifi Remote Modbus TCP module providing 8 Universal Analogue Inputs - 4-20mA, thermocouples and thermistors and 4 digital inputs. It uses optical isolators to prevent ground loop effects and limits damages from power surges. The  A-1219 has a Wifi port supporting Modbus/TCP communications as well as a RS485 port for Modbus RTU. A USB comm port is also available for Modbus communications and configuration.

  • 8 isolated, differential analogue inputs
    • Current: 0-20mA, 4-20mA
    • Thermocouple: J,K,T,E,R,S,B
    • Thermistor: 10k - 1k
  • ADC Resolution: 16-bit
  • Input Impedance:
    • Current: 100 Ω
    • Voltage : 10 MΩ
  • Input Accuracy: ±0.1%
  • Sampling Rate: 10 sample/second (total)
  • 4 Digital Inputs
    • status low: <1VDC,  status high: 5-30VDC
  • CMR @ 50/60 Hz: 120 dB
  • Wifi - Standard 2.4GHz IEEE 802.11 b/g
  • Modes:
    • AP Access Point - connect directly
    • Remote - connect via Wifi network
  • Supplied with removable antenna
  • RS-485 Interface
  • USB Interface for configuration and test
  • Protocol - Modbus/TCP, Modbus RTU
  • Operating Temperature: - 20 to 75º C
  • Power: 10 to 30VDC, 24VAC
  • Panel or DIN Rail mount - stackable for high density applications
  • Dimensions - 72mm x 118mm x 39mm
Included Software

The unit is configured using the free Utility Software. This can be used to set the units' IP address and to set the input ranges and monitor inputs.

Optional Software

DAQFactory

DAQFactory is a low cost data acquisition and control software for SCADA, Factory Automation, HMI and Test and Measurement applications. DAQFactory provides all the tools needed to acquire data, log it, share it on a network, display it on the screen, graph it, analyse it, and automate your project. DAQFactory can communicate with just about any serial or Ethernet device using Modbus RTU, ASCII or Modbus/ TCP. It also supports a wide variety of DAQ devices including LabJack USB devices and many other DAQ cards.

More Information >>

 


Downloads

User Manual >>

Quick Start Guide >>

Utility Software >>

USB Driver >>

Analogue Inputs
8
Digital Inputs
4
Customer Reviews

Be the first to Write a Review for this item!