NANO_IN - Ethernet Digital input Unit with pulse counting, Web, SNMP, Modbus TCP

• 1 x opto-isolated digital input
• Volt-free contact closure or voltage input;
  • logic level 1: 10~24V
• Input also operates as 100Hz pulse counter
• Isolation Voltage: 2000Vdc
• Web Interface
• Communications Protocols;
  • SNMP - for IT alarm trap applications
  • Modbus/TCP - for industrial applications
  • HTTP
• Dimensions: 66mm x 50mm x 20mm
• Power supply:
  • 10-24VDC via RJ45 port.
  • DC power Injector adaptor included
  • Can be used with POE routers with 24V max output
• Operating Temperature: -10°C to 60°C
• CE compliant

Web Interface

The built-in web-server can be used to configure parameters such as IP address etc, and to control the relays, monitor the inputs, and read pulse count values.

Direct connection between modules (bridge connection)

The NANO_IN can be configured in a bridge connection where the digital signal is reproduced on a NANO_OUT output Relay.

LanTick Data Logger application which enables monitoring, stored in a CSV format and send via e-mail inputs and outputs states.

Downloads

User Manual >>

Search Utility >>

LanTick Logger Application >>