T7310 Industrial temperature, humidity, bar. pressure transmitter - RS232 output
Ambient temperature, humidity, atmospheric pressure transmitter. Outdoor, indoor use.
Built-in relative humidity, temperature, atmospheric pressure sensors. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. Supports MODBUS RTU and ASCII ADAM-4000 compatible communications protocol.
- Output: RS232
- Measured Value: Relative Humidity + Temperature + Atmospheric pressure
- Construction Type: Ambient Air
- Design: Industrial
- Temperature Measuring Range: -30 to +80°C
- Relative humidity range: 0 to 100%
- Maximum measuring pressure range 600 to 1100hPa
- Lcd Display
- Accuracy of temperature output: ±0.4°C
- Available temperature units: degrees Celsius, Fahrenheit
- Available pressure units hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2
- Temperature operating range: -30 to +80°C
- Temperature operating range of LCD display: readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
- Communication protocol: ModBus RTU and Advantech ADAM compatible protocol
- Communication speed: 110 to 115200 Bd
- Free program TSensor for configuring of the transmitter is ready to Download
- Free program SensorReader for logging values from one transmitter to a PC disk file is ready to Download
- IP protection: IP65
- Power: 9-30Vdc, current consumption approximately 6mA
- Dimensions: 88.5 x 148 x 39.5 mm (W x H x D), stem length 53 mm
- Weight: approximately 220g
Programmable temperature, humidity and barometric pressure transmitter is equipped with temperature, relative humidity and pressure sensors. Measured values are also converted to other humidity interpretation - dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy. Degrees Celsius and Fahrenheit are user selectable. Transmitter contains a microprocessor based control circuitry in a durable plastic case with connection terminals and sensors in a filter with stainless steel mesh. Large dual line LCD for simultaneous display of T+RH or other humidity interpretation is an advantage. Display is possible to switch off. Computerized design ensures temperature compensation of the humidity sensor and fail indication. State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Transmitters are designed for use in non-aggressive environment.
Measured values are converted to RS232 serial output.
Serial output RS232 - transmitter works with ModBus RTU communication protocol or with Advantech ADAM compatible protocol. Protocol is user selectable in special configuration mode by means of the PC. Serial link enables to read actual readings and modify transmitter configuration. Instrument works always in slave mode, i.e. responds only to master device query. Transmitters have the address space available from 1 to 255. Communication speed is 110 to 115200Bd.
Downloads
User Manual >>
TSensor Configuration Software >>
SensorReader Datalogging Software >>
