Special Offer: Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.
- OEM board-only RS485 temperature sensor
- Temperature range -55 to +125°C.
- 0.1 °C resolution
- Accuracy ±0,5 °C from -10 to +85 °C, otherwise ±2 °C
- Communication line RS485 - up to 32 devices can be connected on a single bus (even more when a repeater is used)
- ModBus RTU protocols supported#
- NEW - Add a TME-Multi for a Web Interface
- 6-20V DC power - low power requirements (typically 2 mA)
TQS3 Module is a digital temperature sensor. It measures temperature within the range from -55°C to +125°C and sends the measured value directly in degrees Celsius. The TQS3 thermometer has a very low consumption and communicates via an RS485 bus line using the MODBUS protocol. These features enable connecting more sensors with a four-wire bus line containing an RS485 link and supply cable to the distance of up to 1200m.
Wix - FREE Powerful datalogging, charting and alarming sftware
| | - Display of numeric values.
- Viewing the colour column (ie bar graph) with colour according to the current value.
- View the text of the current value.
- View the chart - add several charts, add channels to a single chart
- Datalogging - Save the history of measurement in a text file for further processing or evaluation.
- Wix can monitor inputs against pre-set alarm limits;
- Send alarm e-mail
- Switching on output (relay) to Quido
- Reset the counter (counter) input Quido
- Send alarm text message by SMS (requires GSM MODEM)
|
Downloads
User Manual >>
MODBUS Config Software >>
TQS Scanner Software >>
Wix Software Download >>
.jpg)
