Special Offer: Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.
T3419 Industrial temperature and humidity transmitter - RS485 output
Ambient temperature and humidity, transmitter. Outdoor, indoor use.
Built-in relative humidity and temperature sensors. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy. Supports MODBUS RTU and ASCII ADAM-4000 compatible communications protocol.
- Output: RS485
- Measured Value: Relative Humidity + Temperature
- Construction Type: Ambient Air
- Design: Industrial With Temperature +RH Probe On Cable
- Length of the probe cable 1m
- Temperature Measuring Range: -30 to +80°C
- Relative humidity range: 0 to 100%
- Lcd Display
- Accuracy of temperature output: ±0.4°C
- Available temperature units: degrees Celsius, Fahrenheit
- Temperature operating range: -30 to +80°C
- Temperature operating range of LCD display: readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
- Communication protocol: ModBus RTU and Advantech ADAM compatible protocol
- Communication speed: 110 to 115200 Bd
- Free program TSensor for configuring of the transmitter is ready to Download
- Free program SensorReader for logging values from one transmitter to a PC disk file is ready to Download
- IP protection: IP65
- Power: 9-30Vdc, current consumption approximately 6mA
- Dimensions: 88.5 x 148 x 39.5 mm (W x H x D), stem length 53 mm
- Weight: approximately 220g
Programmable temperature and humidity transmitter is equipped with temperature and relative humidity sensors. Measured values are also converted to other humidity interpretation - dew point temperature, absolute humidity, specific humidity, mixing ratio or specific enthalpy. Degrees Celsius and Fahrenheit are user selectable. Transmitter contains a microprocessor based control circuitry in a durable plastic case with connection terminals and sensors in a filter with stainless steel mesh. Large dual line LCD for simultaneous display of T+RH or other humidity interpretation is an advantage. Display is possible to switch off. Computerized design ensures temperature compensation of the humidity sensor and fail indication. State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Transmitters are designed for use in non-aggressive environment.
Measured values are converted to RS485 serial output.
Serial output RS485 - transmitter works with ModBus RTU communication protocol or with Advantech ADAM compatible protocol. Protocol is user selectable in special configuration mode by means of the PC. Serial link enables to read actual readings and modify transmitter configuration. Instrument works always in slave mode, i.e. responds only to master device query. Transmitters have the address space available from 1 to 255. Communication speed is 110 to 115200Bd.
Downloads
User Manual >>
TSensor Configuration Software >>
SensorReader Datalogging Software >>
Temperature Inputs
1
Humidity Inputs
1
