Special Offer: Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.
- 8 Opto-isolated Triac-based Solid State Relay outputs
- Rated: 0.5A @ up to 400VAC
- RS485 - Modbus settavble to ASCII or RTU
- Baud rate from 2400 to 115200
- DIP Switch for address setting
- USB programming port - free software
- Supply voltage: 12-24 V DC ± 20%
- Supply Current: 200 mA @ 12V / 150 mA @ 24V
- Up to 128 modules on RS485 network
- DIN rail mount
- Ribbon connector for module-to-module connection
- Dimensions: 120mm x 101mm x 22mm
- Operating Temperature: -10 °C - +50°C
The MOD-8TR has 8 mains Solid State Relay outputs rated at up to 0.5A @ 400VAC. Each channel can be individually configured in one of several modes.This module is connected to the RS485 bus with twisted-pair wire. Communication is via MODBUS RTU or MODBUS ASCII. The baud rate is configurable from 2400 to 115200.
The module is designed for mounting on a DIN rail in accordance with DIN EN 5002. The module is equipped with a set of LEDs used to indicate the status of inputs and outputs useful for diagnostic purposes and helping to find errors.
| Module configuration is done via USB by using a dedicated free Modbus Configurator software. You can also change the parameters using the MODBUS protocol. The Slim series modules can be easily connected with each other via a ribbon cable. Just connect the power and RS485 to the first module and ribbon cable connect the remaining modules to form a compact IO station without the wiring costs. |  |
Downloads
User Manual >>
Config Software >>
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
