Special Offer: Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.
- 8 opto-isolated digital inputs
- closed contact or digital input
- logic low - 0-3V, logic high 6-36V
- 8 configurable 32-bit counters - timers
- 1 kHz max count rate
- 1 quad encoder inputs
- 8 PNP Transistor Outputs
- 55V @ 250mA per output
- RS485 - Modbus settavble to ASCII or RTU
- Baud rate from 2400 to 115200
- DIP Switch for address setting
- USB programming port - free software
- Supply voltage: 12-24 V DC ± 20%
- Supply Current: 60 mA @ 12V / 40 mA @ 24V
- Up to 128 modules on RS485 network
- DIN rail mount
- Ribbon connector for module-to-module connection
- Dimensions: 120mm x 101mm x 22mm
- Operating Temperature: -10 °C - +50°C
The MOD-8I8O has 8 digital inputs with configurable timer/counter option and 8 high-power transistor outputs. Each channel can be individually configured in one of several modes.This module is connected to the RS485 bus with twisted-pair wire. Communication is via MODBUS RTU or MODBUS ASCII. The baud rate is configurable from 2400 to 115200.
The module is designed for mounting on a DIN rail in accordance with DIN EN 5002. The module is equipped with a set of LEDs used to indicate the status of inputs and outputs useful for diagnostic purposes and helping to find errors.
| Module configuration is done via USB by using a dedicated free Modbus Configurator software. You can also change the parameters using the MODBUS protocol. The Slim series modules can be easily connected with each other via a ribbon cable. Just connect the power and RS485 to the first module and ribbon cable connect the remaining modules to form a compact IO station without the wiring costs. |  |
Downloads
User Manual >>
Config Software >>
Digital Inputs
8
Digital Outputs
8
Pulse Counter Inputs
8
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
