A-1819 Ethernet Modbus TCP - 8-Ch Analogue Input Unit, 4-20mA, Thermocouples, Thermistor

Zoom

Our Price:  £120.00(£144.00 Inc. VAT) –+ Add to Basket Add Mini USB Cable 2m:    + £3.50 Analogue Inputs:  8 Availability:      12 in stock, immediate despatch Share Tweet The  A-1819 Remote Modbus TCP module provides 8 Universal Analogue Inputs - 4-20mA, thermocouples and thermistors. It uses optical isolators to prevent ground loop effects and limits damages from power surges. The  A-1819 has a Ethernet port supporting Modbus/TCP communications and has a simple web-server. A USB comm port is also available for Modbus communications and configuration.

• 8 isolated, differential analogue inputs
  • Current: 0-20mA, 4-20mA
  • Thermocouple: J,K,T,E,R,S,B
  • Thermistor: 10k - 1k
• ADC Resolution: 16-bit
• Input Impedance:
  • Current: 100 Ω
  • Voltage : 10 MΩ
• Input Accuracy: ±0.1%
• Sampling Rate: 10 sample/second (total)
• CMR @ 50/60 Hz: 120 dB
• Interface: ETHERNET + USB
• Protocol - Modbus/TCP
• Operating Temperature: - 20 to 75º C
• Power: 10 to 30VDC, 24VAC
• Panel or DIN Rail mount - stackable for high density applications
• Dimensions - 72mm x 118mm x 39mm

The unit is configured using the free Utility Software. This can be used to set the units' IP address and to set the input ranges and monitor inputs.

Optional Software

DAQFactory DAQFactory is a low cost data acquisition and control software for SCADA, Factory Automation, HMI and Test and Measurement applications. DAQFactory provides all the tools needed to acquire data, log it, share it on a network, display it on the screen, graph it, analyse it, and automate your project. DAQFactory can communicate with just about any serial or Ethernet device using Modbus RTU, ASCII or Modbus/ TCP. It also supports a wide variety of DAQ devices including LabJack USB devices and many other DAQ cards. More Information >>

Downloads

User Manual >>

Quick Start Guide >>

Utility Software >>

USB Driver >>