Special Offer: Discounts of 7%, 10%, 12.5% and 15% are available when you order 10, 25, 50 and 100 items or more of this product.
- 1 x 0-10V Analogue output (resolution 1.5mV)
- 1 x 0-20mA Analogue output (resolution 5uA)
- 2 opto-isolated digital inputs
- closed contact or digital input
- logic low - 0-3V, logic high 6-36V
- 2 configurable 32-bit counters - timers
- 1 kHz max count rate
- 1 quad encoder input
- RS485 - Modbus settable to ASCII or RTU
- Baud rate from 2400 to 115200
- USB programming port - free software
- Supply voltage: 10-36 VDC; 20-28VAC
- Supply Current: 90 mA @ 24V
- Up to 128 modules on RS485 network
- DIN rail mount
- Dimensions: 90mm x 56mm x 17mm
- Operating Temperature: -20 °C - +65°C
The MOD-1AO module has 1 current analogue output (0-20mA lub 4-20mA) and 1 voltage analogue output (0-10V). Both outputs can be used at the same time. The module is equipped in two digital inputs with counter support. In addition, terminals IN1 and IN2 can be used to connect one quad encoder. This module is connected to the RS485 bus with twisted-pair wire. Communication is via MODBUS RTU or MODBUS ASCII. The baud rate is configurable from 2400 to 115200.
Downloads
User Manual >>
Config Software >>
Analogue Outputs
2
Digital Inputs
2
Pulse Counter Inputs
2
.jpg)
.jpg)
.jpg)