GL100-N Graphtec Petit Data Logger

£253.00

(£303.60 Inc. VAT)

1 in stock, immediate despatch

–

The GL100 is a handheld modular data logger that is able to support a wide variety of measurement types by exchanging the input module. The GL100 is very compact, has a easy-to-read mono LCD display and an onboard memory of 4.9MB with external memory via a Micro SD card slot. Recorded data is not displayed on the main unit; Captured data can only be displayed on PC using included application software.

Channels: Up to 4 Channels
Measurements: Temperature, Humidity, Acceleration, Carbon Dioxide, Illuminance (UV), Voltage and Current (NOTE: Requires Appropriate External Sensor or Input Adapter)
Functions
- Real-Time Data Capturing
- Show Recorded Readings to LCD Display and Save Recorded Readings
- Set Conditions Using the Menu Setting
While Using USB Port:
- Output Captured Data in Real-Time
- Output the Saved Data from the Internal Memory
- Full Control of the Data Logger from the PC Application Software
- Send Email Alarm Warnings
Display: Backlit Monochrome, Graphical LCD
Data Storage: Internal Memory (Approx. 4.9 MB), microSD Card (Max. File Size: 1.9 GB)
Alarm: 1 Channel - Output Signal
Sampling Rate: 0.5 Sec to 30 Sec and 1 Minute to 60 Minutes (User-Specified)
Communications: USB
Power Source: (2) AA Batteries, USB Bus-Powered. (NOTE: The Required Power Capacity is 5 Volts, 1 Amp when AC Adapter for Micro USB Drive is Used. AC Adapter (Not Included)
Operating Environment: Temperature: -10°C to 50°C (14°F to 122°F)
Humidity: Up to 80% RH (Non-Condensed)
Software: Supports up to 10 Units
OS Compatibility: Windows: Windows 8.1, 8, 7, Vista (32-Bit and 64-Bit), Android: OS 4.3+, iOS: 7+
Standards Compliance: IP54 (Water Resistance)
Weight: GL100-N: 125 g , GL100-WL: 130 g
Dimensions: GL100-N: 66mm x 100mm x 27mm, GL100-WL: 66mm x 100mm x 27mm

Flexible input module allows wide range of measurements

The GL100 series announces support for additional sensors in volatile wireless and non-wireless environments with ability to exchange input module.

Dual Port Adaptor

Dual port adapter connects up to two modules for simultaneous interface (it is not able to connect two sensors of the same type).

In this example we have a dual port adapter, an Illuminance/UV sensor and a carbon dioxide sensor

http://www.graphteccorp.com/instruments/gl100/images/img_easy_GL100-IUV.jpg

Application software for PC

Various measurement screens

Select from 4 screens such as the Y-T (waveform + digital), Y-T (large waveform), digital view and report view to display measurements in real time. The direct-Excel function enables captured data to be written directly to an Excel file.

Data replay screens

Three screens such as the Y-T (waveform), digital and the X-Y graph for specified data are available to view measurements in replay mode. The maximum, minimum, average and peak-to-peak vales between cursors are indicated in the digital display screen.

Simple configuration screens

The number of configuration screens has been reduced to five. Parameters can be set easily while viewing measured waveforms.

Useful functions

Post-process your captured data with useful functions for arithmetic calculation, statistical calculation, search and file format conversion.

Smartphone and Tablet Software (Wifi Required)

Features

Recording Start/Stop, Sampling Interval, Alarm Output (with the mail sending feature). Display/Recording Configurations of GL840/GL240 using the WEB server feature

Downloads

Brochure >>

User Manual >>

PC Software >>