- 8 x Analogue input Type: 0-10V @ 10-bit resolution
- 2 x Analogue Outputs: 0-10V @ 10-bit resolution
- 4 x Digital Outputs: (Souce Transistor rated 200mA @ 10-40VDC
- Sampling Rate: 10 sample/second (total)
- CMR @ 50/60 Hz: 120 dB
- LED indication of IO status
- Output state pre-settable on Comms fail
- Output state pre-settable on power-up
- Input/Output Operating Frequency: 10HZ
- Interface: RS485
- Protocol - Modbus RTU or Modbus ASCII
- Communication Baud Rate: 1200~115200bps
- Isolation Voltage: 5000 V DC
- Surge , EFT And ESD Protection
- Operating Temperature: - 20 to 75º C
- Power: 10 to 30VDC, 24VAC (RS485)
- Panel or DIN Rail mount
- Dimensions - 72mm x 118mm x 39mm
Included SoftwareThe unit is configured using the free Utility Software. This can be used to set the units' parameters and to set the input ranges and monitor inputs.
Optional Software
| DAQFactory DAQFactory is a low cost data acquisition and control software for SCADA, Factory Automation, HMI and Test and Measurement applications. DAQFactory provides all the tools needed to acquire data, log it, share it on a network, display it on the screen, graph it, analyse it, and automate your project. DAQFactory can communicate with just about any serial or Ethernet device using Modbus RTU, ASCII or Modbus/ TCP. It also supports a wide variety of DAQ devices including LabJack USB devices and many other DAQ cards. More Information >> |  |
Downloads
User Manual >>
Quick Start Guide >>
Utility Software >>
Analogue Inputs
8
Analogue Outputs
2
Digital Outputs
4
